R&S
®
CMW 500 GSM Applications
GSM Command Reference
Operating Manual 1202.3986.32 – 03 297
FETCh:GSM:MEAS<i>:MEValuation:MODulation:PERCentile?
READ:GSM:MEAS<i>:MEValuation:MODulation:PERCentile?
Returns the 95
th
percentile results of the multi-evaluation measurement.
It is also possible to retrieve only a part of these results using dedicated commands. A
reference to the description of the corresponding commands and returned values is
given below.
Returned values
<Reliability>, Reliability indicator
<Bursts Out Tol>, Percentage of measurement intervals / bursts of the statistic
count
(CONFigure:GSM:MEAS<i>:MEValuation:SCOunt:MODula
tion) exceeding the specified limits, see Limits (8PSK
Modulation) and Limits (GMSK Modulation).
Range: 0 % to 100 %
Def. unit: %
<EVM Percentile>, see EVM Measurement Results (Single Values)
<MERR Percentile>, see Magnitude Error Measurement Results (Single Values)
<PERR Percentile> see Phase Error Measurement Results (Single Values)
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
FETCh:GSM:MEAS<i>:MEValuation:MODulation:OVERview?
READ:GSM:MEAS<i>:MEValuation:MODulation:OVERview?
Returns an overview of all single value measurement results of the multi-evaluation
measurement.
It is also possible to retrieve only a part of these results using dedicated commands. A
reference to the description of the corresponding commands and returned values is
given below.
The symbols (x4)/(x9) behind a value indicate that the list contains four/nine results as
follows:
(x4): Current, Average, Min/Max, Standard Deviation
(x9): RMS (x4), Peak (x4), 95th Percentile
Returned values
<Reliability>, Reliability indicator
To Next Page
Loading...
