SATO CL6NX - Page 441

439
Data array to write
The maximum number of digits are twice the
maximum byte size that can be specified for
each inlet.
Availability of omissible parameters for each product(except for Ignore RFID tag error)
Inlet type ICODE(a=2) Tag-it(a=3) my-d
(a=5)
Product SLI SLIX SLIX-S HF-
I Plus
HF-I Pro HF-
I Stan
dard
vp
SRF55
V10P
(Custom)
vp
SRF55
V10P
(ISO)
iso × × × × × × × ○
wsb ○ ○ ○ ○ ○ ○ ○ ○
lbs ○ ○ ○ ○ ○ ○ × ○
lbn ○ ○ ○ ○ ○ ○ × ○
eas ○ ○ ○ × × × × ×
afi ○ ○ ○ ○ × × ○ ○
dsf ○ ○ ○ ○ × × × ×
eal ○ ○ ○ × × × × ×
afl ○ ○ ○ ○ × × ○ ○
dsl ○ ○ ○ ○ × × × ×
eap × ○ × × × × × ×
eai × × ○ × × × × ×
pw0,1 × × ○ × × × × ×
pw2,3,4 × × ○ × × × × ×
aw0,1 × × ○ × × × × ×
aw2,4 × × ○ × × × × ×
kpw × × × × ○ × × ×
pps × × ○ × × × × ×
Parameter
(Standard
format)
fsw ○ ○ ○ ○ ○ ○ ○ ○
○ : Operable × : Inoperable
my-d ISO operation (omissible)
iso: Valid range : 0 ~ 1
Specify 1 to access my-d using ISO-15693 standard. The my-d custom command
is used to access my-d if this field is not specified or is 0.
Note
• Specify 1 to this field so that it can be used with ISO when you write to my-d light
SRF550V01P since this chip does not support custom commands.