442
Parameters related to various password settings for ICODE (omissible)
Valid range: 00000000-FFFFFFFF, 8-digit
hexadecimal
pw2: Privacy mode setting Sets password for privacy mode.
Valid range: 00000000-FFFFFFFF, 8-digit
hexadecimal
pw3: Disable tag Sets password to disable tag.
Valid range: 00000000-FFFFFFFF, 8-digit
hexadecimal
pw4: EAS protect Sets password to protect EAS (shoplifting prevention)
function.
Valid range: 00000000-FFFFFFFF, 8-digit
hexadecimal
Parameters related to passwords to access ICODE (omissible)
aw0: Read protect authentication for
user memory
Authenticates with password to access tags that are
read/write protected with pw0:.
Valid range: 00000000-FFFFFFFF, 8-digit
hexadecimal
aw1: Write protect authentication for
user memory
Authenticates with password to access tags that are
write protected with pw1:.
Valid range: 00000000-FFFFFFFF, 8-digit
hexadecimal
aw2: Authentication to set/release
Privacy mode
Authenticates with password to access tags that are
in Privacy mode by pw2:.
Valid range: 00000000-FFFFFFFF, 8-digit
hexadecimal
aw4: Authentication to release EAS
protect
Authenticates with password to access tags that are
protected by pw4:.
Valid range: 00000000-FFFFFFFF, 8-digit
hexadecimal
Parameters related to setting password for kill command in Tag-it (omissible)
kpw: Kill command password Sets password to disable tag. Sets password only.
The tag itself is not disabled.
Valid range: 00000000-FFFFFFFF, 8-digit
hexadecimal
Parameters related to page protection settings (omissible)
pps: Page protection Valid range : lllm
lll = Page address(3-digit decimal)
m = Type of condition (refer to the following table)
Switches specified page address from the initial
“Public” to other modes.
If individual page addresses are specified, up to 8
sets can be specified per tag write.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
