SeaDoo GTI - Page 99

Section 04 ENGINE (2-STROKE)
Subsection 02 (REMOVAL AND INSTALLATION)
1
F07F12C
TYPICAL — 787 RFI AND 947 DI ENGINES — REAR SUPPORT
1. Remove screws
Lifting Engine
717 Engines
Engine can be easily lifted using lifting rings
(P/N 529 035 830) and the engine lift tool (P/N 529
035 940).
A33B06A
LIFTING RING
Remove spark plugs and replace by lifting ring
(P/N 529 035 830).
Hook engine lift tool (P/N 529 035 940) into lifting
ring holes.
A00B6BA
ENGINE LIFT TOOL
Using a chain block, a hoist or other suitable equip-
ment, slightly lift engine to ease the remaining
component removal.
CAUTION: Take care not to damage cable or oil
injection hoses.
787 RFI and 947 DI Engines
Engine can be easily lifted by inserting a hook into
exhaust manifold eyelet.
F01D7OA
TYPICAL
Using a chain block, a hoist or other suitable equip-
ment, slightly lift engine to ease the remaining
component removal.
CAUTION: Take care not to damage cable or oil
injection hoses.
74 smr2004-Complete Line Up
www.SeaDooManuals.net