Spectra T50e - Updating the Software Media Inventory

Chapter 7—Using Cartridges in the Library Using the Cartridge Inventory
August 2017 User Guide—Spectra T50e Library
223
6. ClickNext.TheMoveQueuescreendisplays.Themoveyoujust
definedislistedontheleftsideofthescreen.
7. Toaddanothermove,clickAdd MoveandrepeatStep3onpage221
throughStep6onthispageforeachadditionalcartridgeyouwantto
move.
Afteryoufinishcreatingthemovequeue,youarereadyforthelibrary
toperformtherequestedmoves.
Note: Ifyouwanttoremoveoneormoreofthemovesinthequeue:
 SelectthemoveandclickDelete Selected toremoveitfrom
theMoveQueuelist.
 ClickDelete Alltoremoveallofthedefinedmovesfromthe
MoveQueuelist.
8. ClickStart MovesontheInventoryscreentobeginprocessingthe
movesintheorderthattheyarelistedinthequeue.
Aprogressscreentrackstheprogressofthemoveoperations.Whenall
ofthemovesinthequeueareprocessed,thelibrarydisplaysaMove
Statusscreenshowingtheresultofeachmove.
Note: IfyouselectedAccess Portasthedestinationforamove,the
accessportopensafterthecartridgeismovedtotheE/Eslot.A
FeedbackRequiredscreendisplaysinstructingyoutoremove
thecartridgeandclosetheport.
Ifyouwanttoexchangethecartridgeforadifferentone,remove
thecartridgeandreplaceitwiththenewone.
Afteryouclosetheaccessport,thelibrarymovesthecartridgeto
thelocationoriginallyoccupiedbythecartridgeyouremoved.
9. Whenallofthemovesinthequeuearecomplete,astatusscreen
displaysshowingtheresultsofthemoves.ClickFinishtoreturntothe
Inventoryscreen.
Figure 146 Click Start Moves to begin processing the move queue.
Click Start Moves to
begin processing the
Move Queue.
Important
If the move destination is the access port, do not close the access port until a
Feedback Required screen notifies you that the port can be closed.