Spectra T50e - CHAPTER 8 Configuring and Using Media Lifecycle Management

Chapter 7—Using Cartridges in the Library Using the Cartridge Inventory
August 2017 User Guide—Spectra T50e Library
224
10. Useyourstoragemanagementsoftwaretoupdatetheinventoryit
maintains(seeUpdatingtheSoftwareMediaInventoryonpage225).
Complete Any Move to the E/E Slot
IfoneofthemoveshadadestinationofEE slot,completeoneofthe
followingactionswhenallofthemovesinthequeuearecomplete.
Remove the cartridge from the E/E slot
1. Fromthelibraryoperatorpanel,clickMENU,thenselectGeneral >
Import/Export.TheImport/Exportscreendisplaysshowingthe
informationforthelastpartitionthatwasviewedoneitherthe
Import/ExportscreenortheInventoryscreen.
2. ClickOpen Doortoopentheaccessport.
3. RemovethecartridgefromtheE/Eslot.
Move the cartridge to another partition
RepeatStep2onpage221throughStep9onthispagetocreateand
processamovequeuethatmovesthecartridgefromtheE/Eslottoa
differentstoragepartition.
Figure 147 Click Open Door to open the access port and remove the
cartridge.
Click Open Door