Spectra T50e - Updating Drive Device Drivers

Chapter 15—Maintaining the Drives Updating Drive Firmware
August 2017 User Guide—Spectra T50e Library
450
3. Selectthepartitionyouwanttousefromthedrop‐downlist,thenclick
Go.TheImport/Exportscreenrefreshestoshowthecurrentstatusofthe
slotsassignedtotheselectedpartition.
Note: Ifthelibraryonlyhasonepartitionconfigured,theImport/Export
screenshowsthatpartitionanddoesnotincludeadrop‐downlist.
4. ClickOpen Door.Aprogressscreendisplaysdescribingtheprocess.
5. Whentheaccessportopens,insertthecartridgeintotheE/Eslot,
smoothsideupandwiththebarcodelabelfacingout.Pushthe
cartridgeintotheslotuntilthelatchontheslotengagestheridgeson
thecartridge.
6. Waitforamessagepromptingyoutoclosetheaccessport.
7. Gentlypushtheaccessportclosed.
Figure 308 Select the partition and then click Open Door to open the
access port.
Select partition
Click Open Door
Important
The slot is keyed to only accept a correctly oriented cartridge. Do not force the
cartridge into the slot.
Figure 309 Insert the cartridge into the E/E slot.
Barcode label
facing outward
Important
Do not use force to push the access port closed, and do not close the port before
you are prompted to do so.