Spectra T50e - ADDING OR REPLACING A DRIVE

Chapter 15—Maintaining the Drives Updating Drive Firmware
August 2017 User Guide—Spectra T50e Library
451
Perform the Update
1. Ifyouwanttosavetheinformationaboutthefirmwareversionstoa
USBdevice,connectaUSBdevicetoaUSBportontheLCMandallow
timeforthedevicetomount.
Note: TheoptiontosavetheinformationtoaUSBdeviceisonly
displayedifyouplugaUSBdeviceintotheLCMbeforeyou
select Utilities(seeUsingaUSBDeviceonpage147).
2. ClickMENU,thenselectMaintenance > UtilitiestodisplaytheUtilities
screen.
3. Click Show Advanced.TheAdvancedUtilitiesConfirmationscreen
displays.
4. ClickYestoacknowledgethewarningaboutusingtheadvanced
utilities.TheAdvancedUtilitiesscreendisplaysalistoftheadvanced
utilities.
5. ScrollthroughthelistofadvancedutilitiesandselectUpdate Drive
Firmware.
6. ClickSelect.TheDescriptionscreenshowsadescriptionoftheutility.
7. ClickNextandusetheSelect drive or partition to upgrade listtoselect
thedrivesyouwanttoupdate.
Note: Donotselectacleaningpartitionifoneislisted.Thereareno
drivesassociatedwithacleaningpartition.
Figure 310 Select the Update Drive Firmware utility.
Figure 311 Select the drive or partition that you want to
update.