200Boards
© Tibbo Technology Inc.
·
Software-controlled onboard PLL to select the clock frequency of the device:
11.0592MHz with PLL off, 88.4736MHz with PLL on.
·
Power:
- DS1206N-RS and "-TM": onboard regulator, 10-24V input range (12V nominal);
- DS1206N-TS: direct 3.3V input (must be regulated to +/- 5%).
·
Board dimensions: 52.6x38.0mm.
·
Firmware and Tibbo BASIC/C application are upgradeable through the serial port or
network.
·
Tibbo BASIC/C application can be debugged through the network and no additional
debugging hardware, such as in-circuit emulator, is required.
·
Also available as a DS1206 (DS1206N board with housing).
Programming features
·
Variable Types: Byte, char, integer (word), short, dword, long, real, string, plus
user-defined arrays and structures.
·
Function Groups: string functions (27 in total!), date/time conversion functions
(8), encryption/hash calculation functions (AES128, RC4, MD5, SHA-1), and more.
·
Platform objects:
- Sock — socket communications (up to 16 UDP, TCP, and HTTP sessions);
- Net — controls the Ethernet port;
- Ser — in charge of serial channels;
- Io — handles I/O lines, ports, and interrupts;
- Fd — manages flash memory file system and direct sector access;
- Stor — provides access to the EEPROM;
- Romfile — facilitates access to resource files (fixed data);
- Pat — "plays" patterns on green and red status LEDs;
- Button — monitors the setup button;
- Sys — in charge of general device functionality.
To Next Page
Loading...
Need help?
General