491 Programmable Hardware Manual (PHM)
© Tibbo Technology Inc.
Always returns 0xAA55. This is a common
signature for all Bus Probes.
Users are free to save any application-specific
data in this register.
Users are free to save any application-specific
data in this register.
Users are free to save any application-specific
data in this register.
Users are free to save any application-specific
data in this register.
Firmware version of the Monitor/Loader.
Firmware version of the application firmware.
R = read, W = write, W
p
= protected write (possible only while the MD button* is
being pressed).
* Each Bus Probe comes with a metal pin that makes pushing and holding down the
MD button easier.
Additional registers of BP#01 (ambient temperature sensor)
Processed fixed-point temperature data expressed
in steps of 0.01 degrees C.
Measurement resolution is 0.25 degrees C.
Raw temperature data from the measurement IC
(MCP9808).
See vendor datasheet for details.
R = read (only)