Phaser 6280 Color Laser Printer Service Manual 4-21
General Troubleshooting
Clear All NVM Clear All NVM
â– OK?
â– Processing
â– Initialized
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
run the test>
Clears all NVRAM of the Controller
including billing.
Clear Job
History
Clear JobHistory
â– OK?
â– Processing
â– Initialized
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
run the test>
Deletes the job history data.
Note: Job History can also be
initialized by Clear All NVM.
Clear
Auditron PV
Clear AuditronPV
â– OK?
â– Processing
â– Initialized
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
run the test>
Initializes Auditron or Print Volume.
Print Volume and Auditron work
exclusively and share the setting
memory area.
When Auditron is enabled, user
account and restricted information is
cleared.
When Print Volume is enabled, Print
Volume Counter is initialized.
Note: AuditronPV can also be initialized
by Clear All NVM.
HD Erase
(not displayed
when Hard
Drive not
installed)
HD Erase
â– OK?
â– Processing
â– Initialized
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
execute the initialization>
Erases the Hard Disk Drive. This
feature is available only when a Hard
Disk Drive is installed.
Test Print Provides various test prints to be used for troubleshooting the
printer.
Menu Buttons
<Press the Up or Down
button to switch from
one item to another>
<Press the Cancel button
to move one/two level(s)
up the menu>
<Press the Set button to
run the test>
Service Diagnostic Test Table (continued)
Test Control Panel Display Test Description
To Next Page
Loading...
Need help?
General
