YASKAWA V1000 Series Technical Manual

LED Operator Display Name Page
oPE05 Run Command Selection Error 243
oPE07 Multi-Function Analog Input Selection Error 243
oPE08 Parameter Selection Error 244
oPE09 PID Control Selection Error 244
LED Operator Display Name Page
oPE10 V/f Data Setting Error 244
oPE11 Carrier Frequency Setting Error 244
oPE13 Pulse Train Monitor Selection Error 244
n
Auto-Tuning Errors
Table 6.7 Auto-Tuning Error Displays
LED Operator Display Name Page
Er-01 Motor Data Error 245
Er-02 Alarm 245
Er-03 STOP button Input 245
Er-04 Line-to-Line Resistance Error 245
Er-05 No-Load Current Error 245
Er-08 Rated Slip Error 245
LED Operator Display Name Page
Er-09 Acceleration Error 245
Er-11 Motor Speed Error 245
Er-12 Current Detection Error 245
End1 Excessive V/f Setting 246
End2 Motor Iron Core Saturation Coefficient Error 246
End3 Rated Current Setting Alarm 246
6.3 Drive Alarms, Faults, and Errors
228
YASKAWA ELECTRIC SIEP C710606 18A YASKAWA AC Drive – V1000 Technical Manual (Preliminary)

YASKAWA V1000 Series Specifications

General

Model	V1000 Series
Series	V1000
Output Frequency	0.1 to 400 Hz
Overload Capacity	150% for 60 seconds
Type	AC Drive
Control Method	V/f Control
Input Voltage	200-240V, 380-480V
Output Voltage	0 to Input Voltage
Power Range	0.1 to 18.5 kW
Horsepower	0.2 to 25 HP
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit, Ground Fault
Communication Interfaces	Modbus RTU
Enclosure	IP20
Ambient Temperature	-10 to +50°C
Storage Temperature	-20 to +60°C
Humidity	5 to 95% RH (non-condensing)
Cooling Method	Fan Cooled