141
The Erase function erases all or part of a track in a specific
sequence.
To select the sequence you want to erase, use the
Sequence field.
To select the track you want to erase within the
sequence, use the Track field.
To set the time range of the sequence you want to
erase, use the Bar, Beat, and Tick fields. The left
fields set the start of the time range, and the right
fields set the end of the time range.
To select what types of events you erase, select one
of the Erase options:
All erases all pad events from the designated time
range and reset all of its settings.
Automation erases only automation from the
designated time range.
Note erases only specific pad events from the
designated time range. In the diagram of the eight
pad banks that appears, press each pad in each
bank to select or deselect its notes. This option is
available only for MIDI tracks, not audio tracks.
Except Note erases everything except pad events
from the designated time range. This option is
available only for MIDI tracks, not audio tracks.
To confirm your choice, tap Do It.
To return to the previous screen, tap  Back or
anywhere outside the window.
To cancel and return to Main Mode, tap Cancel.
The Clear function erases all events from the sequence
and resets all of its settings.
To confirm your choice, tap Clear.
To return to the previous screen, tap Cancel.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
