154
While using audio tracks, you can use any of these functions as described below.
To return to Main Mode, tap Cancel or the left arrow () in the upper-left corner of the screen. Alternatively, press
Main.
To edit the name of the track, tap the top of the screen and use the virtual keyboard that appears.
The Delete function erases the entire audio track.
To confirm your choice, tap Clear.
To return to the previous screen, tap Cancel.
The Clear Regions function erases all regions from the
audio track without erasing the track itself.
The Reset Channel Strip function:
• clears all Insert effect slots;
• turns Mute, Solo, automation, and Monitor off;
• resets the pan knob to the center;
• resets the level slider to 0.00 dB; and
• turns the Record Arm button off.
It does not change the track’s inputs or outputs.
To Next Page
Loading...
