XE4 Card Attributes Introduction
1-239
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
DESTROY CARD
Syntax
DESTROY CARD=slot-list [FORCE]
Description Removes software provisioning for the specified card or list of cards. The command fails if
the administrative state for each card has not already been set to DOWN (See DISABLE
CARD). A warning is provided for this command and confirmation is required.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example DESTROY CARD=2 GE24POE
Option Description Default Value
FORCE Suppress.es the warning and bypasses the confirmation
To Next Page
Loading...
Need help?
General
