Introduction XE4 Card Attributes
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
1-240
DESTROY PROFILE
Syntax
DESTROY PROFILE=name cardtype
Description Destroys a profile for the specified card type. No other attributes are required. Any
managed entity that had a Profile applied is set to (no profile association).
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example DESTROY PROFILE=GOLD GEPORT
Option Description Default Value
card_type The type of card. For the SBx3112, the allowed card
types are GE24POE, GE24SFP, and XE4.
N/A
To Next Page
Loading...
Need help?
General
