Example Output GE Interfaces
2-15
Software Reference for SwitchBlade x3100 Series Switches (Interface Management)
Example
SET INTERFACE 0.23 GE DIRECTION=NETWORK
Info (020186): Successfully modified interface(s) 0.23
DUPLEX The duplex mode to be used (AUTONEGOTI-
ATE|FULL|HALF).
AUTONEGOTI-
ATE
FLOWCON-
TROL
Specifies whether flow control is enabled for GE ports.
For GE ports, the parameter can either be ON or OFF.
If ON, the port can generate and respond to pause sig-
nals with the remote peer.
If OFF, pause is ignored and not generated, and poten-
tial for packet loss is increased.
FLOWCONTROL is independent of AUTONEGOTIA-
TION.
The user can set this parameter only when the interface
is disabled.
OFF
DIRECTION NETWORK - The interface is toward another system,
and so data packets from multiple customers are carried
over the link.
CUSTOMER - The interface is toward a customer site
and all data streams are associated with the customer.
CUSTOMER
FORCE Suppress any confirmation message.
Option Description Default Value
To Next Page
Loading...
