Configuring the GE24POE Card Configuration Guidelines
Software Reference for SwitchBlade x3100 Series Switches (Power over Ethernet (PoE))
3-14
SET POE THRESHOLD
Syntax
SET POE THRESHOLD=1..99
Description Sets the PoE options for the system for the power usage threshold. This is the percent-
age of the total power available that is currently being used (instantaneous usage, not
requested usage). The default threshold is 99 percent. When the threshold is exceeded,
an alarm notification is recorded.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
SET POE THRESHOLD=75
Option Description Default Value
THRESH-
OLD
Percentage of total power available that is currently in
use. The range is 1-99 percent.
99
To Next Page
Loading...
