Configuring LAG Introduction
4-37
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
DELETE LAG
Syntax
DELETE LAG=lagname
INTERFACE={ type:id-range | id-range | ifname-list | ALL}
Description This command removes ports from the LAG group.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example DELETE LAG=card1_card8 INTERFACE=1.0,1.1
Option Description Default Value
LAG The lagname already created.
INTERFACE The XE or GE interfaces that will be included in the
LAG. These can be added
individually or as a comma-
separated id-ranges or as a forward-slash sepa-
rated type:id-ranges.
To Next Page
Loading...
