Allied Telesis SwitchBlade x3100 Series - Page 475

EPSR and (R)STP Interaction Introduction
4-155
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
DELETE EPSR VLAN
Description Deletes a VLAN from the already existing EPSR domain. This operation is only allowed
when the EPSR domain is disabled.
Syntax
DELETE EPSR={ epsrdomain-list | ALL } VLAN={ vlanname | vid | ALL }
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example DELETE EPSR=allied VLAN=403
Option Description Default Value
EPSR The name(s) that has been given to the EPSR
domain(s)
NA
VLAN The VLAN(s) that are going to be deleted from the
EPSR domain
NA