To Next Page

To Previous Page

Configuring the Ingress Metering Introduction

6-55

Software Reference for SwitchBlade x3100 Series Switches (Access and Security)

DELETE TRAFFICDESCRIPTOR CLASSIFIER

Syntax

DELETE TRAFFICDESCRIPTOR={ tdname-list | ALL } CLASSIFIER={ classi-

fiername-list | ALL }

Description Removes the association of a TRAFFICDESCRIPTOR with one or more CLASSIFIERs.

This removes this limit on the traffic that the system allows to be received through this

INTERFACE for the traffic flow identified by the CLASSIFIER.

Options The following table gives the range of values for each option that can be specified with

this command and a default value (if applicable).

Example

DELETE TRAFFICDESCRIPTOR=large_rate CLASSIFIER=ALL

Option Description Default Value

TRAFFICDE-

SCRIPTOR

The already created TRAFFICDESCRIPTOR(s), sepa-

rated by a comma

ALL - All already created TRAFFICDESCRIPTOR(s)

CLASSIFIER The name of the classifier(s), separated by a comma

Allied Telesis SwitchBlade x3100 Series User Manual

Questions and Answers: