Allied Telesis SwitchBlade x3100 Series User Manual

Introduction Configuring the Ingress Metering
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-56
DESTROY TRAFFICDESCRIPTOR
Syntax
DESTROY TRAFFICDESCRIPTOR={ tdname-list | ALL }
Description Attempts to remove every specified TRAFFICDESCRIPTOR from the system, and
returns an error message for any that cannot be destroyed. This command is allowed
only if the TRAFFICDESCRIPTOR is not associated with any classifiers. Use
DELETE
TRAFFICDESCRIPTOR CLASSIFIER
" to delete TRAFFICDESCRIPTOR associations to clas-
sifiers.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DESTROY TRAFFICDESCRIPTOR=large_rate
Option Description Default Value
TRAFFICDE-
SCRIPTOR
The name(s) of the already created TRAFFICDESCRIP-
TOR(s), separated by a comma.

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English