Allied Telesis SwitchBlade x3100 Series User Manual

Configuring the Ingress Metering Introduction
6-57
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
SET TRAFFICDESCRIPTOR
Syntax
SET TRAFFICDESCRIPTOR=tdname-list [ RATE=bits-per-second ] [ BURST-
SIZE={ 4KB | 8KB | 16KB | 32KB | 64KB | 128KB | 256KB | 512KB | 1MB
| 2MB | 4MB | 8MB | 16MB | 32MB | 64MB } ]
Description Modifies one or more TRAFFICDESCRIPTORs. This applies new values for RATE and
BURSTSIZE for all CLASSIFIERS to which the TRAFFICDESCRIPTOR(s) are associated.
Refer to CREATE TRAFFICDESCRIPTOR RATE BURSTSIZE for details on options.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example SET TRAFFICDESCRIPTOR=large_rate RATE=2M BURSTSIZE=256KB
Option Description Default Value
TRAFFICDE-
SCRIPTOR
The name(s) of the already created TRAFFICDESCRIP-
TOR(s), separated by a comma.
RATE=bits-
per-second
Refer to CREATE TRAFFICDESCRIPTOR RATE
BURSTSIZE
BURSTSIZE Refer to CREATE TRAFFICDESCRIPTOR RATE
BURSTSIZE

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English