Allied Telesis SwitchBlade x3100 Series User Manual

Introduction Configuring Port Authentication
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-114
ENABLE DOT1X
Syntax
ENABLE DOT1X
Description This command enables the 802.1X-based Port Authentication feature system-wide. Note
that this command will enable any port that has been enabled for DOT1X at the inter-
face level.
Options N/A
Example ENABLE DOT1X

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English