Allied Telesis SwitchBlade x3100 Series - Page 677

Configuring Port Authentication Introduction
6-117
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
RESET DOT1X COUNTER
Syntax
RESET DOT1X COUNTER [ INTERFACE={ type:id-range | id-range |
ifname-list | ALL } ] [ SUPPLICANT={ macaddress-list | ALL } ] [
TYPE={ STATISTICS | DIAGNOSTICS | SESSIONSTATISTICS | ALL } ]
Description This command resets a supplicant's 802.1X-based Port Authentication counters/statistics.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
RESET DOT1X COUNTER
Option Description Default Value
INTERFACE The ethernet interfaces over which the Counters will be
reset.
ALL
SUPPLI-
CANT
Specifies a supplicant's MAC address or ALL supplicants. ALL
TYPE The type of counters/statistics
STATISTICS
DIAGNOSTICS
SESSIONSTATISTICS
ALL
ALL