Introduction Configuring BFD
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
7-128
DELETE BFD INTERFACE
Syntax
DELETE BFD INTERFACE={ type:id-range | id-range | ifname-list | ALL
} [ FORCE ]
Description Deletes the BFD feature for the selected interfaces
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DELETE BFD INTERFACE=8.18,8.19
Option Description Default Value
INTERFACE The interface where BFD will be deleted
FORCE Overrides the confirmation message that command
could impact service if the remote peer is enabled.
200ms
To Next Page
Loading...
Need help?
General
