Configuring BFD Introduction
7-129
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
DISABLE BFD INTERFACE
Syntax
DISABLE BFD INTERFACE={ type:id-range | id-range | ifname-list |
ALL } [ FORCE ]
Description Disables BFD for the selected interface(s).
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DISABLE BFD INTERFACE=8.18,8.19
Option Description Default Value
INTERFACE The interface where BFD will be disabled.
FORCE Overrides the confirmation message that command
could impact service if the remote peer is enabled.
To Next Page
Loading...
Need help?
General
