5. CONFIGURATION
It’s possible to access SNMPv3 using default user, see table below:
Username Type
Authentication
Protocol
Password
Privacy Pro-
tocol
Privacy Pass-
word
administrator rwuser MD5 administrator - -
Table 202: SNMPv3 Default User info
For all settings of communities, user and password, some limits must be respected, as described on the following table:
Configurable
item
Minimum
Size
Max Size Allowed Characters
rocommunity - 30 [0-9][a-z][A-Z]@$*_.
rwcommunity - 30 [0-9][a-z][A-Z]@$*_.
V3 User - 30 [0-9][a-z][A-Z]@$*_.
V3 Password 8 30 [0-9][a-z][A-Z]@$*_.
Table 203: SNMP settings limits
5.14. User Management and Access Rights
It provides functions to define users accounts and to configure the access rights to the project and to the CPU. Using the
software MasterTool IEC XE, it’s possible to create and manage users and groups, setting, different access right levels to the
project.
Simultaneously, the Nexto CPUs have an user permissions management system that blocks or allows certain actions for
each user group in the CPU. For more information, consult the MasterTool IEC XE User Manual MT85000 – MU299609, in
the User Management and Access Rights section.
267
To Next Page
Loading...
Need help?
General
