ALTUS Nexto Series User Manual

7. MAINTENANCE
Message Description
TRANSFERRING ERROR
Indicates there is been an error in the project transference caused
by some problem in the memory card or its removal during trans-
ference.
TRANSFERRING COMPLETE Indicates the transference has been executed successfully.
TRANSFERRING TIMEOUT
Indicates a time-out has been occurred (communication time ex-
pired) during the project transference.
CPU TYPE MISMATCH
Indicates the CPU model is different from the one configured in
the project within the memory card.
VERSION MISMATCH
Indicates the CPU version is different from the one configured
in the project within the memory card.
APPLICATION CORRUPTED Indicates the application within the memory card is corrupted.
APPLICATION NOT FOUND
Indicates there is no application in the memory card to be trans-
ferred to the CPU.
CRC NOT FOUND Indicates that the CRC application does not exist.
MCF FILE NOT FOUND Indicates there is no MCF file in the memory card.
NO TAG
There is no configured tag for the CPU in the MasterTool IEC
XE.
NO DESC
There is no configured description for the CPU in the MasterTool
IEC XE.
MSG. ERROR
Indicates that there are error(s) on diagnostics message(s) of the
requested module(s).
SIGNATURE MISSING
Indicates the product presented an unexpected problem. Get in
contact with Altus Technical Support sector.
APP. ERROR RESTARTING
Indicates that occurred an error in the application and the Run-
time is restarting the application.
APP. NOT LOADED Indicates that the runtime will not load the application.
LOADING APP. Indicates that the runtime will load the application.
WRONG SLOT Indicates that the CPU is in an incorrect position in the rack.
FATAL ERROR
Indicates that there are serious problems in the CPU startup such
as CPU partitions that were not properly mounted. Please, con-
tact Altus customer support.
HW-SW MISMATCH
Indicates that the CPU hardware and software are not compatible
because the product presented an unexpected problem. Please,
contact Altus customer support.
UPDATING FIRMWARE Indicates the firmware is being updated in the CPU.
RECEIVING FIRMWARE Indicates the updating file is being transferred to the CPU.
UPDATED Shows the firmware version updated in the CPU.
UPDATE ERROR
Indicates an error has occurred during the CPU firmware updat-
ing, caused by communication failure or configuration problems.
REBOOTING SYSTEM...
Indicates the CPU is being restarted for the updating to have
effect.
Table 246: Other Messages of the Graphic Display
373

ALTUS Nexto Series Specifications

General

Brand	ALTUS
Model	Nexto Series
Category	Computer Hardware
Language	English