6-359
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Informational-Level Alarms
Enum Definitions for IPAddrAttributes
Enum Definitions for IPV6AddrAttributes
Recommended Action
None
230 7916_24_BUTTON_LINE_EXPANSION_MODULE
232 CKEM_36_BUTTON_LINE_EXPANSION_MODULE
254 UNKNOWN_MGCP_GATEWAY
255 UNKNOWN
30027 ANALOG_PHONE
30028 ISDN_BRI_PHONE
30032 SCCP_GATEWAY_VIRTUAL_PHONE
Code Reason
0 Unknown—The device has not indicated what this IPv4 address is used for.
1 Administrative only—The device has indicated that this IPv4 address is used for
administrative communication (web interface) only.
2 Signal only—The device has indicated that this IPv4 address is used for control
signaling only.
3 Administrative and signal—The device has indicated that this IPv4 address is
used for administrative communication (web interface) and control signaling.
Code Reason
0 Unknown—The device has not indicated what this IPv6 address is used for.
1 Administrative only—The device has indicated that this IPv6 address is used for
administrative communication (web interface) only.
2 Signal only—The device has indicated that this IPv6 address is used for control
signaling only.
3 Administrative and signal—The device has indicated that this IPv6 address is
used for administrative communication (web interface) and control signaling.
To Next Page
Loading...
