7-19
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-CCM-MIB
deviceInitiatedReset(8),
callManagerReset(9),
deviceUnregistered(10),
malformedRegisterMsg(11),
sccpDeviceThrottling(12),
keepAliveTimeout(13),
configurationMismatch(14),
callManagerRestart(15),
duplicateRegistration(16),
callManagerApplyConfig(17),
deviceNoResponse(18),
emLoginLogout(19),
emccLoginLogout(20),
energywisePowerSavePlus(21),
callManagerForcedRestart(22),
sourceIPAddrChanged(23),
sourcePortChanged(24),
registrationSequenceError(25),
invalidCapabilities(26),
fallbackInitiated(28),
deviceSwitch(29)
}
CcmDeviceStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
This syntax is used to identify the registration status of a device with the local Cisco Unified CM.
The status is as follows:
–
unknown—The registration status of the device is unknown
–
registered—The device has successfully registered with the local Cisco Unified CM.
–
unregistered—The device is no longer registered with the local Cisco Unified CM.
–
rejected—Registration request from the device was rejected by the local Cisco Unified CM.
–
partiallyregistered—At least one but not all of the lines are successfully registered to the Cisco
Unified CM. Applicable only to SIP Phones.
SYNTAX INTEGER { unknown (1), registered (2), unregistered (3), rejected (4),
partiallyregistered (5)}
CcmPhoneProtocolType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
To Next Page
Loading...
