2-29
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 2 New and Changed Information
Cisco Unified Communications Manager, Release 8.0(1)
Changed Alarms in Call Manager Catalog
The following CallManager alarms are changed in the alarm catalog:
TLSConnectionToIMEFailed TLS Failure to IME service.
New SAF and CCD Alarms
LostConnectionToSAFForwarder Connection to the SAF Forwarder has been lost.
SAFForwarderError SAF Forwarder error response sent to Unified CM.
SAFUnknownService Unified CM does not recognize the service ID in a publish revoke
or withdraw message.
SAFPublishRevoke A CLI command revoked the publish action for the specified
service or subservice ID.
SAFResponderError This is raised when SAF forwarder doesn't know the transaction
ID within SAF response from this Cisco Unified CM.
DuplicateLearnedPattern This alarm occurs when CCD requesting service received a
duplicate Hosted DN.
CCDIPReachableTimeOut CCD Requesting Service IP Reachable Duration times out.
CCDPSTNFailOverDurationTime
Out
The internal limit on PSTN failover has expired.
CCDPSTNFailOverDurationTime
Out
CCD has reached the maximum number of learned patterns
allowed.
New Alarms in External Call Control
ConnectionFailureToPDP A connection request from Unified CM to the policy decision
point (PDP) failed.
ConnectionToPDPInService A connection was successfully established between Cisco
Unified Communications Manager (Unified CM) and the policy
decision point (PDP).
AwaitingResponseFromPDPTimeo
ut
Cisco Unified Communication Manager timed out waiting for the
routing response from the policy decision point.
ErrorParsingResponseFromPDP Cisco Unified Communications Manager failed to parse one or
multiple optional elements or attributes in the call routing
response from the policy decision point.
ErrorParsingDirectiveFromPDP Cisco Unified Communications Manager (Unified CM) failed to
parse the call routing directive or the diversion destination in the
call routing response from the policy decision point (PDP).
FailureResponseFromPDP The policy decision point (PDP) returned a 4xx (client) or 5xx
(server) status code in the HTTP response.
CallAttemptBlockedByPolicy A call was attempted but blocked or rejected by the policy
decision point (PDP).
FailedToFulfillDirectiveFromPDP Cisco Unified Communications Manager cannot fulfill the call
routing directive returned by the PDP.
DigitAnalysisTimeoutAwaitingRes
ponse
Cisco Unified Communications Manager sent a routing request
to the policy decision point but the request timed out without a
response.
Alarm Name Description
To Next Page
Loading...
