7-71
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 7 Cisco Management Information Base
CISCO-CCM-MIB
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
The Cause code of the failure. This cause is derived from a monitoring thread in the Cisco Unified
CM or from a heartbeat monitoring process.
unknown: Unknown
heartBeatStopped: The Cisco Unified CM stops generating a heartbeat
routerThreadDied: The Cisco Unified CM detects the death of the router thread
timerThreadDied: The Cisco Unified CM detects the death of the timer thread
criticalThreadDied: The Cisco Unified CM detects the death of one of its critical threads
deviceMgrInitFailed: The Cisco Unified CM fails to start its device manager subsystem
digitAnalysisInitFailed: The Cisco Unified CM fails to start its digit analysis subsystem
callControlInitFailed: The Cisco Unified CM fails to start its call control subsystem
linkMgrInitFailed: The Cisco Unified CM fails to start its link manager subsystem
dbMgrInitFailed: The Cisco Unified CM fails to start its database manager subsystem
msgTranslatorInitFailed: The Cisco Unified CM fails to start its message translation manager
subsystem
suppServicesInitFailed: The Cisco Unified CM fails to start its supplementary services
subsystem.
::= { ccmNotificationsInfo 2 }
ccmPhoneFailures OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
The count of the phone initialization or communication failures that are stored in the
ccmPhoneFailedTable object.
::= { ccmNotificationsInfo 3 }
ccmPhoneUpdates OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
The count of the phone status changes that are stored in the ccmPhoneStatusUpdateTable object.
::= { ccmNotificationsInfo 4 }
ccmMediaResourceType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
To Next Page
Loading...
Need help?
General