EasyManua.ls Logo

Cisco MCS-7825-H3-IPC1 - Page 74

Cisco MCS-7825-H3-IPC1
974 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-32
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 2 New and Changed Information
Cisco Unified Communications Manager, Release 8.0(1)
MaxCallDurationTimeout Severity changed from Informational to Notice.
Following parameters added:
Originating Device name(String)
Destination Device name(String)
Call start time(UInt)
Call stop time(UInt)
Calling Party Number(String)
Called Party Number(String)
MaxCallsReached Severity changed from Error to Critical.
MaxHoldDurationTimeout Following parameters added:
Originating Device Name(String)
Destination Device Name(String)
Hold start time(UInt)
Hold stop time(UInt)
Calling Party Number(String)
Called Party Number(String)
MediaResourceListExhausted Enum Definitions for MediaResourceType is
updated.
MohNoMoreResourcesAvailable Severity changed from Error to Warning.
MtpNoMoreResourcesAvailable
Severity changed from Error to Warning.
Media Resource List Name parameter added.
MultipleSIPTrunksToSamePeerAndLocalPort Severity level is Error.
NoFeatureLicense Severity changed from Error to Emergency.
NotEnoughChans
Severity changed from Error to Warning.
Device Name(String) is the only parameter.
NumDevRegExceeded Severity level is Error (3).
PktCapOnDeviceStarted Severity level is Informational (6).
PktCapOnDeviceStopped Severity level is Informational (6).
PktCapServiceStarted Severity level is Informational (6).
PktCapServiceStopped Severity level is Informational (6).
RouteListExhausted Severity level is Warning.
RsvpNoMoreResourcesAvailable Media Resource List Name(String) parameter is
added.
SDLLinkISV Severity changed from Informational to Notice.
SDLLinkOOS Severity changed from Error to Alert.
Alarm Names Alarm Changes

Table of Contents

Related product manuals