2-36
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 2 New and Changed Information
Cisco Unified Communications Manager, Release 8.0(1)
• DB Alarm Catalog—The following DB alarms are updated in the alarm catalog:
• DRF Alarm Catalog—The following new DRF alarms are added in the alarm catalog:
• IMS Alarm Catalog—The following IMS alarms are updated in the alarm catalog:
UnableToRegisterwithCallManagerService CTI cannot communicate with Cisco CallManager
service to register supplementary service features.
UnableToSetorResetMWI An error occurred when setting the message waiting
indication (MWI) lamp.
Alarm Name Description
Alarm Name Alarm Changes
ErrorChangeNotifyClientBlock Changed severity level to Critical from Error.
ErrorReadingInstalledRPMS Severity level is Error (3).
IDSEngineCritical Changed severity level to Error from Critical.
IDSEngineDebug Changed severity level to Informational from Debug.
IDSReplicationInformation Severity level is Informational.
Alarm Name Alarm Changes
DRFBackupCompleted DRF backup completed successfully.
DRFLocalDeviceError DRF unable to access local device.
DRFNoBackupTaken A valid backup of the current system was not found after an
Upgrade, Migration, or Fresh Install.
DRFRestoreCompleted DRF restore completed successfully.
Alarm Name Alarm Changes
AdminPassword Severity level is Informational.
authAdminLock Severity level is Warning (4).
authExpired Added Routing List element and updated the parameter list.
authFail Changed severity level from Notice to Warning.
authHackLock Updated the parameter list.
authInactiveLock Updated the parameter list.
authLdapInactive Severity level is Warning (4).
authMustChange
• Parameter list is updated.
• Routing List element is added.
authSuccess Severity level is Informational (6).
credFullUpdateFailure Severity level is Informational (6).
credFullUpdateSuccess Severity level is Informational (6).
To Next Page
Loading...
