8-38
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 8 Industry-Standard Management Information Base
RFC1213-MIB (MIB-II)
STATUS deprecated
DESCRIPTION
The Address Translation tables contain the NetworkAddress to physical address equivalences. Some
interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has
an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty,
i.e., has zero entries.
::= { at 1 }
atEntry OBJECT-TYPE
SYNTAX AtEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
Each entry contains one NetworkAddress to physical address equivalence.
INDEX { atIfIndex, atNetAddress }
::= { atTable 1 }
AtEntry ::=
SEQUENCE { atIfIndex INTEGER, atPhysAddress PhysAddress, atNetAddress NetworkAddress }
atIfIndex OBJECT-TYPE
SYNTAX Integer
ACCESS read-write
STATUS deprecated
DESCRIPTION
The interface on which this entry equivalence is effective. The interface identified by a particular
value of this index is the same interface as identified by the same value of ifIndex.
::= { atEntry 1 }
atPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-write
STATUS deprecated
DESCRIPTION
The media-dependent physical address. Setting this object to a null string (one of zero length) has
the effect of invaliding the corresponding entry in the atTable object. That is, it effectively
disassociates the interface identified with said entry from the mapping identified with said entry. It
is an implementation-specific matter as to whether the agent removes an invalidated entry from the
table. Accordingly, management stations must be prepared to receive tabular information from
agents that corresponds to entries not currently in use.
Proper interpretation of such entries requires examination of the relevant atPhysAddress object.
::= { atEntry 2 }
atNetAddress OBJECT-TYPE
SYNTAX NetworkAddress
To Next Page
Loading...
Need help?
General