8-44
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 8 Industry-Standard Management Information Base
RFC1213-MIB (MIB-II)
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
The IP address to which this entry addressing information pertains.
::= { ipAddrEntry 1 }
ipAdEntIfIndex OBJECT-TYPE
SYNTAX Integer
ACCESS read-only
STATUS mandatory
DESCRIPTION
The index value which uniquely identifies the interface to which this entry is applicable. The
interface identified by a particular value of this index is the same interface as identified by the same
value of ifIndex.
::= { ipAddrEntry 2 }
ipAdEntNetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address
with all the network bits set to 1 and all the hosts bits set to 0.
::= { ipAddrEntry 3 }
ipAdEntBcastAddr OBJECT-TYPE
SYNTAX Integer
ACCESS read-only
STATUS mandatory
DESCRIPTION
The value of the least-significant bit in the IP broadcast address used for sending datagrams on the
(logical) interface associated with the IP address of this entry. For example, when the Internet
standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet
and network broadcasts addresses used by the entity on this (logical) interface.
::= { ipAddrEntry 4 }
ipAdEntReasmMaxSize OBJECT-TYPE
SYNTAX Integer (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented
datagrams received on this interface.
To Next Page
Loading...
Need help?
General