EasyManua.ls Logo

Cisco MCS-7825-H3-IPC1 - Page 850

Cisco MCS-7825-H3-IPC1
974 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8-46
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 8 Industry-Standard Management Information Base
RFC1213-MIB (MIB-II)
STATUS mandatory
DESCRIPTION
The index value which uniquely identifies the local interface through which the next hop of this
route should be reached. The interface identified by a particular value of this index is the same
interface as identified by the same value of ifIndex.
::= { ipRouteEntry 2 }
ipRouteMetric1 OBJECT-TYPE
SYNTAX Integer
ACCESS read-write
STATUS mandatory
DESCRIPTION
The primary routing metric for this route. The semantics of this metric are determined by the
routing-protocol specified in the route ipRouteProto value. If this metric is not used, its value should
be set to -1.
::= { ipRouteEntry 3 }
ipRouteMetric2 OBJECT-TYPE
SYNTAX Integer
ACCESS read-write
STATUS mandatory
DESCRIPTION
An alternate routing metric for this route. The semantics of this metric are determined by the
routing-protocol specified in the route ipRouteProto value. If this metric is not used, its value should
be set to -1.
::= { ipRouteEntry 4 }
ipRouteMetric3 OBJECT-TYPE
SYNTAX Integer
ACCESS read-write
STATUS mandatory
DESCRIPTION
An alternate routing metric for this route. The semantics of this metric are determined by the
routing-protocol specified in the route ipRouteProto value. If this metric is not used, its value should
be set to -1.
::= { ipRouteEntry 5 }
ipRouteMetric4 OBJECT-TYPE
SYNTAX Integer
ACCESS read-write
STATUS mandatory
DESCRIPTION

Table of Contents

Related product manuals