Cisco MCS-7825-H3-IPC1 User Manual

8-66
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 8 Industry-Standard Management Information Base
RFC1213-MIB (MIB-II)
The number of EGP state transitions to the UP state with this EGP peer.
::= { egpNeighEntry 10 }
egpNeighStateDowns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
The number of EGP state transitions from the UP state to any other state with this EGP peer.
::= { egpNeighEntry 11 }
egpNeighIntervalHello OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
The interval between EGP Hello command retransmissions (in hundredths of a second). This
represents the t1 timer as defined in RFC 904.
::= { egpNeighEntry 12 }
egpNeighIntervalPoll OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
The interval between EGP poll command retransmissions (in hundredths of a second). This
represents the t3 timer as defined in RFC 904.
::= { egpNeighEntry 13 }
egpNeighMode OBJECT-TYPE
SYNTAX INTEGER { active(1), passive(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
The polling mode of this EGP entity, either passive or active.
::= { egpNeighEntry 14 }
egpNeighEventTrigger OBJECT-TYPE
SYNTAX INTEGER { start(1), stop(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION

Cisco MCS-7825-H3-IPC1 Specifications

General

Brand	Cisco
Model	MCS-7825-H3-IPC1
Category	Software
Language	English