Cisco MCS-7825-H3-IPC1 User Manual

8-86
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 8 Industry-Standard Management Information Base
HOST-RESOURCES-MIB
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The current status of this printer device.
::= { hrPrinterEntry 1 }
hrPrinterDetectedErrorState OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
This object represents any error conditions detected by the printer. The error conditions are encoded
as bits in an octet string, with the following definitions (condition first then bit number):
– lowPaper 0
– noPaper 1
– lowToner 2
– noToner 3
– doorOpen 4
– jammed5
– offline 6
– serviceRequested 7
– inputTrayMissing 8
– outputTrayMissing 9
– markerSupplyMissing 10
– outputNearFull 11
– outputFull 12
– inputTrayEmpty 13
– overduePreventMaint 14
Bits are numbered starting with the most significant bit of the first byte being bit 0, the least
significant bit of the first byte being bit 7, the most significant bit of the second byte being bit 8, and
so on. A one bit encodes that the condition was detected, while a zero bit encodes that the condition
was not detected.
This object is useful for alerting an operator to specific warning or error conditions that may occur,
especially those requiring human intervention.
::= { hrPrinterEntry 2 }
hrDiskStorageTable OBJECT-TYPE
SYNTAX Sequence of hrDiskStorageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION

Cisco MCS-7825-H3-IPC1 Specifications

General

Brand	Cisco
Model	MCS-7825-H3-IPC1
Category	Software
Language	English