8-118
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 8 Industry-Standard Management Information Base
IF-MIB
ifHCInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The total number of octets received on the interface, including framing characters. This object is a
64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization
of the management system, and at other times as indicated by the value of
ifCounterDiscontinuityTime.
::= { ifXEntry 6 }
ifHCInUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed
to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime.
::= { ifXEntry 7 }
ifHCInMulticastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to
a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and
Functional addresses. This object is a 64-bit version of ifInMulticastPkts.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime.
::= { ifXEntry 8 }
ifHCInBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to
a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts.
Discontinuities in the value of this counter can occur at re-initialization of the management system,
and at other times as indicated by the value of ifCounterDiscontinuityTime.
To Next Page
Loading...
Need help?
General