Introduction
2 ClareVision Plus Network Video Recorder User Manual
Universal Serial Bus (USB) ports for additional devices such as
USB mouse and USB Hard Disk Drive (HDD)
Return to the previous menu
Press for arming or disarming the device in Live View mode
Enter the Manual Record setting menu
In the PTZ control settings, press REC/SHOT and then press a
Numeric button to call a PTZ preset
Turn audio on and off in Playback mod
Use to enter Playback mode
Use to auto-scan in the PTZ Control menu
Zoom in the PTZ camera in the PTZ Control setting
Adjust focus in the PTZ Control menu
Use to switch between input methods (upper and lowercase
alphabet, symbols and numeric input)
Edit text fields. When editing text fields, it functions as a
Backspace button
On check box fields, pressing the button will check the box
In PTZ Control mode, the button adjusts the iris of the camera
Use in Playback mode to generate video clips for backup
Enter or exit the folder of USB device and eSATA HDD
Switch between main and spot output
Use in PTZ Control mode to zoom out of the image
Select all items on the list when used in a list field.
In PTZ Control mode, it will turn on/off PTZ light (if applicable).
Use in Playback mode to switch between play and reverse play.
In synchronous playback mode, it is used to switch between
channels.
Press the button to return to the Main menu (after successful
login).
Press and hold the button for 5 seconds will turn off audible key
beep.
In PTZ Control mode, the MENU/WIPER button will start wiper (if
applicable).
In Playback mode, it is used to show/hide the control interface.
Switch between single screen and multi-screen mode.
In PTZ Control mode, it is used to adjust the focus in conjunction
with the A/FOCUS Plus button.
To Next Page
Loading...
