Introduction
ClareVision Plus Network Video Recorder User Manual 3
Enter the PTZ Control mode.
In the PTZ Control mode, it is used to adjust the iris of the PTZ
camera.
The DIRECTION buttons are used to navigate between different
fields and items in menus.
In the Playback mode, use the Up and Down button to speed up
and slow down recorded video. The Left and Right button select
the next and previous record files.
In Live View mode, use these buttons to cycle through channels.
In PTZ control mode, control the movement of the PTZ camera.
The ENTER button is used to confirm selection in any of the menu
modes.
Use to check the check box fields.
In Playback mode, it is used to play or pause the video.
In single-frame Playback mode, pressing the button will advance
the video by a single frame.
In Auto-switch mode, use to stop /start auto switch.
Move the active selection in a menu. It will move the selection up
and down.
In Live View mode, use to cycle through different channels.
In Live View mode, use to cycle through different channels.
In the Playback mode: For 64-Channel NVRs, the ring is used to
jump 30s forward/backward in video files.
In PTZ control mode, it controls the movement of the PTZ camera.
To Next Page
Loading...
