DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly
.
– All installation, maintenance and repair work must only be performed by
authorised and trained specialist personnel in accordance with the
applicable local regulations.
– Safety regulations and prescribed protective clothing when handling
chemicals should be followed. Attention must be paid to the information
included on the product data sheet for the metering medium used.
– Prior to installation, maintenance and repair works the feeding of the dosing
medium should be disconnected and the system cleaned.
NOTICE!
Only original equipment spare parts may be used for maintenance and
repairs.
Before maintenance work is permitted to be performed on the pump, the
pump should be changed to maintenance mode!
The causes the motor and the diaphragm to be reset, simplifying the
maintenance work!
Safety
21 417102264 Rev. 5-01.2019
To Next Page
Loading...
Need help?
General
