Ecolab EcoPro - EcoPro Pump Key System

13.3 ‘EcoPro’ pump key
The pump key comprises four groups:
n Group I: Control unit:
Ä Chapter 13.3.1 ‘Pump key group I’ on page 75
n Group II: Pump head:
Ä Chapter 13.3.2 ‘Pump key group II’ on page 76
n Group III: Housing/driver unit:
Ä Chapter 13.3.3 ‘Pump key group III’ on page 76
n Group IV: Packaging/accessories:
Ä Chapter 13.3.4 ‘Pump key group IV’ on page 76
Example:
Control unit Pump head Housing/driver unit Packaging/accessories
1 2 3 4 5 6 7 8 9 10 11 11 13 14
EcoPro E S 01210S D F C 0 0 S 1 S S 0
Complete key: EcoPro ES-01210S-DFC-00S-1S-S0
13.3.1 Pump key group I
"Control unit" [EcoPro|E|S]
Pos. 1: ‘Pump name/electrical version’
EcoAdd
Buttons/settings: On/off, test, viscosity high/low, 1:100
LED's: Operation, viscosity high/low, alarm
Inputs: Enable
Pos. 2: ‘Mains supply connection’
E 2.5 m mains cable with a European plug
U 2.5 m mains cable with a US plug
N 2.5 m mains cable without mains plug (with wire end ferrules)
Pos. 3: ‘Control unit version’
S Standard
T Rotated control unit
C With protective cover (Eco Pro)
Technical specifications
75 417102264 Rev. 5-01.2019