Ecolab EcoPro User Manual

10.2.2.3 Replacement part module: Pump head 30 l/h and 50 l/h
Fig. 28: Replacement part module: Pump head 30 l/h and 50 l/h
Pos. Designation Article No. EBS No.
A Adhesive label for commissioning / tightening torque (6 Nm) 34900291 On request
1 Hexagon socket screw, M 6 x 90, DIN 912, V2A 413031148 On request
2 Washer, 17 x 6.4 x 3 DIN 7349 V2A 413501304 On request
3
Pump head, 30/50 l/h, PP 35200116 On request
Pump head, 30/50 l/h, PVDF 35200117 On request
4
Suction valve, PFC-000 G5/8-G5/8-99 252024 On request
Suction valve, PEC-000 G5/8-G5/8-99 252025 On request
Suction valve, DFC-000 G5/8-G5/8-99 252026 On request
Suction valve, DEC-000 G5/8-G5/8-99 252027 On request
5
Pressure valve, PFC-000 G5/8-G5/8-99 252020 On request
Pressure valve, PEC-000 G5/8-G5/8-99 252021 On request
Pressure valve, DFC-000 G5/8-G5/8-99 252022 On request
Pressure valve, DEC-000 G5/8-G5/8-99 252023 On request
6 Diaphragm 35200120 On request
7a Diaphragm extension, 30 l/h 35200121 On request
7b Diaphragm extension, 50 l/h 35200148 On request
8a Intermediate plate 35200118 On request
8b Intermediate plate with sensor mount 35200119 On request
9 Diaphragm rupture sensor, complete 252081 On request
10 Protective diaphragms 35200137 On request
NOTICE!
During assembly
, it is essential to observe the tightening torque attached to the
pump head! See also
Ä Chapter 13.6 ‘Tightening torques’ on page 78
Consumables and spare parts
66417102264 Rev. 5-01.2019

Ecolab EcoPro Specifications

General

Brand	Ecolab
Model	EcoPro
Category	Water Pump
Language	English