Edge-Core ECS4210-12P Web Management Guide

Chapter 4 | Interface Configuration
Trunk Configuration
– 127 –
Web Interface
To display LACP settings and status for the remote side:
1. Click Interface, Trunk, Dynamic.
2. Select Configure Aggregation Port from the Step list.
3. Select Show Information from the Action list.
4. Click Internal.
5. Select a group member from the Port list.
Figure 60: Displaying LACP Port Remote Information

Edge-Core ECS4210-12P Specifications

General

Brand	Edge-Core
Model	ECS4210-12P
Category	Network Router
Language	English