EasyManuals Logo

Edge-Core ECS4210-12P Web Management Guide

Edge-Core ECS4210-12P
550 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
Chapter 3
| Basic Management Tasks
Managing System Files
– 71 –
Managing System Files
This section describes how to upgrade the switch operating software or
configuration files, and set the system start-up files.
Copying Files via FTP/
TFTP or HTTP
Use the System > File (Copy) page to upload/download firmware or configuration
settings using FTP, TFTP or HTTP. By backing up a file to an FTP/TFTP server or
management station, that file can later be downloaded to the switch to restore
operation. Specify the method of file transfer, along with the file type and file
names as required.
You can also set the switch to use new firmware or configuration settings without
overwriting the current version. Just download the file using a different name from
the current version, and then set the new file as the startup file.
Command Usage
When logging into an FTP server, the interface prompts for a user name and
password configured on the remote server. Note that “Anonymous” is set as the
default user name.
Parameters
The following parameters are displayed:
Copy Type – The firmware copy operation includes these options:
FTP Upgrade – Copies a file from an FTP server to the switch.
FTP Download – Copies a file from the switch to an FTP server.
HTTP Upgrade – Copies a file from a management station to the switch.
HTTP Download – Copies a file from the switch to a management station
TFTP Upgrade – Copies a file from a TFTP server to the switch.
TFTP Download Copies a file from the switch to a TFTP server.
FTP/TFTP Server IP AddressThe IP address of an FTP/TFTP server.
User Name – The user name for FTP server access.
Password – The password for FTP server access.
File Type – Specify Operation Code or Loader.
File Name
The file name should not contain slashes (\ or /),
the leading letter
of the file name should not be a period (.), and the maximum length for file
names is 32 characters for files on the switch or 128 characters for files on the
server. (Valid characters: A-Z, a-z, 0-9, “., “-”, “_”)

Table of Contents

Other manuals for Edge-Core ECS4210-12P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edge-Core ECS4210-12P and is the answer not in the manual?

Edge-Core ECS4210-12P Specifications

General IconGeneral
BrandEdge-Core
ModelECS4210-12P
CategoryNetwork Router
LanguageEnglish

Related product manuals