Chapter 12
| Security Measures
ARP Inspection
– 318 –
Web Interface
To display statistics for ARP Inspection:
1. Click Security, ARP Inspection.
2. Select Show Information from the Step list.
3. Select Show Statistics from the Action list.
Figure 206: Displaying Statistics for ARP Inspection
Displaying the
ARP Inspection Log
Use the Security > ARP Inspection (Show Information - Show Log) page to show
information about entries stored in the log, including the associated VLAN, port,
and address components.
Parameters
These parameters are displayed:
ARP packets dropped by
additional validation (Src-MAC)
Count of packets that failed the source MAC address test.
ARP packets dropped by ARP
ACLs
Count of ARP packets that failed validation against ARP ACL rules.
ARP packets dropped by DHCP
snooping
Count of packets that failed validation against the DHCP Snooping
Binding database.
Table 20: ARP Inspection Statistics (Continued)
Parameter Description
Table 21: ARP Inspection Log
Parameter Description
VLAN ID The VLAN where this packet was seen.
Port The port where this packet was seen.
Src. IP Address The source IP address in the packet.
To Next Page
Loading...
Need help?
General
