Edge-Core ECS4210-12P - Figure 236: Displaying Basic LLDP Information for a Remote Device (Port)

Chapter 13 | Basic Administration Protocols
Link Layer Discovery Protocol
– 376 –
■
ECS ELIN – Emergency Call Service Emergency Location Identification
Number supports traditional PSAP-based Emergency Call Service in North
America.
◆ Country Code – The two-letter ISO 3166 country code in capital ASCII letters.
(Example: DK, DE or US)
◆ What – The type of device to which the location applies as described for the
field entry “Device entry refers to” under “Configuring LLDP Interface
Attributes.”
Port Details – Inventory
7
◆ Hardware Revision – The hardware revision of the end-point device.
◆ Software Revision – The software revision of the end-point device.
◆ Manufacture Name – The manufacturer of the end-point device.
◆ Asset ID – The asset identifier of the end-point device. End-point devices are
typically assigned asset identifiers to facilitate inventory management and
assets tracking.
◆ Firmware Revision – The firmware revision of the end-point device.
◆ Serial Number – The serial number of the end-point device.
◆ Model Name – The model name of the end-point device.
Web Interface
To display basic LLDP information for a remote interface:
1. Click Administration, LLDP.
2. Select Show Remote Device Information from the Step list.
3. Select Port or Trunk.
Figure 236: Displaying Basic LLDP Information for a Remote Device (Port)